sudarshan split pressurized wall mounted solar water heater system

FOB Price:USD 965.0-1600.0/Carton Get Latest Price
Certification:CE,Solar Keymark EN12975,SRCC,CCC,SGS,ISO9001,ISO14001
Capable:EMF,Water Mark,Solar Keymark EN12976,SASO,GS,TUV,RoHS
Minimum Order:5 PCS
Brief Description:It is widely used in cold regions and high-end markets,such as Europe,South Africa,Korea,Russia,Australia,Northern America,Southern America,etc.


  • Product Details

Basic Specification

Flat PanelCooper cover coating of blue titanium
Tank Insulation LayerPolyurethane foamed
Volume100 liter~1000 liter
InstallationFloor satnd/wall mounted
With Accessories or NotYes
Body MaterialsGlass, Others, Stainless Steel
Circulation TypeIndirect Loop
InstallationFloor Stand
Current TypeInverter
Heating SystemBatch / ICS
CertificationCE, ISO, Other, SRCC

Detail Description

sudarshan split pressurized wall mounted solar water heater system

The split solar water heater is an active system,because it uses a pump with a controller to circulate the fluid in the 
system.Storage thank and solar flat plate panel collector are separate,while the collector is integrated in to the roof of the building,the 
tank and the pump station can be installed anywhere of the building. The piping between the main components is made 
of brass and a special insulation with high temperature resistance for solar systems.This system is especially suitable for 
cold area, even-35 ℃.Now ,the split solar water heater is more and more popular in the world.

Working Principle:
1.When the temperature of the heat pipe collector reaches the set valve, the controller shall start the circulation pump 

2.The circulation pump makes heat-conducting liquid circulate automatically.
3.The heat-conducting liquid transfer heat to water by the heat exchanger in the water tank.
4.In case the temperature of the collector dose not reach the set valve, the circulation pump shall be shut automatically
5.In case the temperature of the water tank dose not reach T-max, then start the auxiliary heating device.

1) No disorder water tank on your roof.
   Split solar water heater is using a high efficiency solar collector on your roof and a highly pressurized storage tank in 
   the house.Integrated into the roof of the building perfectly.
2) Anti-freezing,perfect for cold climate.
  Heap pipe evacuated tubes collector do not carry the risk of freezing which will destroy other systems.
  Importantly,preventing them from freezing and bursting in cold climates and it can be used all year round in the 
  cold climate.
3) The perfect solar collector for domestic hot water heating system can be combined with existing energy source,
   such as your gas water heater,electric water heater,boiler,etc.
4) There is an auxiliary heating device--- electric heater booster in the tank which can help to provide hot water in case of cloudy or rainy days,you will not 
need to worry about it.
5) No water inside the tubes,the system can still in service even with several tubes breakage.
6) Completely automatic.
7) Cut out your energy bills.
  Hot water heating(on average) accounts for 26% of your annual energy bill.

 Technical Data:
Split Solar Flat Plate Water Heater ( water tank with two copper coils )
ModelSS-F2-150                      (with one collector)SS-F2-200               (with one collector)SS-F2-250             (with two collectors)SS-F2-300              (with two collectors)SS-F2-400              (with three collectors)SS-F2-500            (with three collectors)
Solar CollectorCore MaterialCopper
CoatingCooper cover coating of blue titanium which made in Germany
Absorption rate: α=0.95 Reflection rate ε=0.04. 
Base Plate of PanelMarine-grade H3004 Aluminum, toughnessH32 Thickness 0.7mm
Glass of PanelSpecial glass for panel with ANS1297-1-1975, BS6206A and JIS R3206 standards; toughness with AS2208-1978 and federal standards of United States
Panel  InsulationBottom with fiberglass insulation ,Thickness 60mm,Density 20kg/m³;Side-thickness insulation:13mm;Density 23kg/m³;                                 Thermal properties: R1.0 ;Thermal conductivity : 0.059W/m
Water TankVolume150L200L250L300L400L500L
Insulating LayerPolyurethane Foaming ,Thickness:45mm-50mm                              
Outer TankColor Steel Plate(enamal white),Thickness:0.53mm
Inner tanktank: stainless steel 304; Thickness: 1.2-1.5mm; Normal working pressure: 6 bar; Test pressure: 12 bar
WorkstationCirculation PumpRS-15/6(WILO)
Expansion Tank5L8L8L12L12L18L


Additional Information

Payment TermsL/C, T/T
Minimum Order5 PCS
Lead Time / Delivery Time15 Day(s)
Sample AvailableNO
Delivery Details15 days for full containers after receiving your payment10 dyas for LCL order
FOB PortShanghai
Loading InfoFOB: to Shanghai or Ningbo Port,ChinaCIF: to Customers’ local port
Packing Info1. Full container: Standard Export Carton(Foam+Carton)2. LCL Order: Special Packing(Wooden Pallet)+Standard ExportCarton(Foam+Carton)3. Customize.
Target Market(s)North America, Oceania, Eastern Europe, Latin America, Japan & Korea, Western & Southern Europe, Northern Europe

Send your message to this manufacturer

SearchPost Buying Lead